How to Troubleshooting a Dead Computer Without Warning

Computers die broken aliases can arise in two ways and if the computer is off and no warning beforehand, it means that you can still find out about what the source of the problem.

But if it is being used and suddenly the computer turns itself off without any warning? What are the causes and the solutions? This is the solution:

The cause and the solution can be one of the below possibilities.

1. Computers are too hot or overheated 
2. Problem error / hardware malfunction. 
3. The virus computer. 
4. Problems with the operating system for example Windows . 
5. Another failure of hardware

Computer too hot or overheated.
A computer can turn itself off without warning if it has exceeded the maximum heat required (especially Processor). Many computers today are designed to shut down or reboot automatically if the computer, processor, or other devices on your computer to overheat. If you've heard the voices that are not normal from your computer like a buzzing high, this could indicate a failure in your computer.

You can start by checking out the fan in the power supply to check the back of the computer is off and see if the fan moves smoothly. You can also open up the computer and make sure the fan works (processor fan and the fan casing) and / or if the VGA using a fan, then please go into the BIOS and make sure the BIOS does not report any errors. Note also the location of the aluminum cooler because if the position is not right, then even if there is a fan, the cooling process will remain masalah.Pengguna may also be able to determine how hot the computer with onboard thermal sensor. If your computer is equipped with a sensor, make sure you are not active CPU overheat

Problem error / hardware malfunction
Any failure of your computer hardware components can cause your computer to unexpectedly die without warning. If you recently added new hardware, make sure it does not cause problems for your computer. Before attempting to open the hardware, make sure you do not run into problems due to a hardware conflict by looking at the Device Manager to check for errors.
If problems arise when you just installed new hardware into the computer, then certainly the cause of this new device. Start the computer after opening the earlier device and observe if the problem is completed or not.

Virus Computer
Maybe your computer is infected with a virus that is designed to turn off your computer. If the computer Matia itself when running a specific program at a specific time, such as a computer directly only die if you run the program Word then that's a sign that the program is infected or infected with a virus. If you believe your computer may be infected with a virus or are not sure whether your computer is infected with a virus, make sure you do scan whit latest anti-virus.

The problem with the operating system.
If after following all the above recommendations your computer still continue to die alone, chances are you have problems operating system of Microsoft Windows that is difficult to explain. To help ensure that this happens, please try the steps below.

Reboot the computer and enter CMOS setup as the computer is booting. If you are not familiar with how to enter CMOS, please download the Guide to Become a Computer Technician I prepared on the side. Once you have opened the computer in the CMOS setup, leave the computer for a while. If the computer does not die in some time meant he was able to survive the road in the BIOS then the probable cause is a Microsoft Windows. If this happens the solution is in the book Guide to Become a Computer Technician Another failure of hardware

If after reinstalling your operating system, or during the installation of your operating system, the same case is still going on, it is possible that there are other hardware failures in the computer. Often occurs for example RAM, CPU, motherboard, and / or Power Supply. If you have an extra supply of these parts or have a friend or co-worker with the same configuration, try swapping these parts to determine the problem you.If not, you need a more senior technician services, please read Theoretical computer science.

Read More

How to Change Desktop Backgrounds Windows 7 Starter and Home

How to Change Desktop Backgrounds Windows 7 Starter Wallpaper . The Windows 7 Starter edition does not include the Personalization features such as the change desktop background option. Many are complaining because Microsoft got rid of most of the main features in Windows 7 Starter. This sort of thing takes place prior to the customer's operating system bundled with a PC / notebook / netbook they buy.

One of the feature that is missing is the Personalization fiturs very possible you to configure the monitors you use. This sort of thing is also the result you can not change the background / wallpaper logo windows 7 with your favorite pictures.The Windows 7 Home Basic edition does not have the Personalization feature either, and will only allow you to change the desktop background by right clicking on a image and clicking on Set as desktop background.

Surely this sort of bias was addressed through how to update your Windows 7 Starter for a superior versus like Windows 7 Home Basic, Windows 7 Home Premium, Windows 7 Professional or Windows 7 Ultimate. But with the record you have to spend more to buy a license from Microsoft. 

You can use the tutorial at the link below to be able to change the desktop background like in Personalization in the Windows 7 Starter and Home Basic editions:

1. Connect the PC / notebook / netbook with the Internet. 
2. Download the installer Oceanis Change Backgrounds Desktop Windows 7. 
3. Extract the ZIP file you downloaded earlier. 
4. Run the installer file and follow the installation process to complete. 
5. Restart the computer / notebook / netbook. 
6. After you restart, the default wallpaper Windows 7 will be changed to the logo oceanis software. You can change this by running the software Oceanis Change Desktop Backgrounds Windows 7. 
7. Locate the folder where the picture file you want to use as background / wallpaper. Select the images you want to set desktop backgrounds. You can also select multiple settings such as slide shows and specify other options. 
8. Click Save Changes.

Currently the desktop background s/ wallpaper same switch according to your taste. Perhaps setting that you've done before going back as early (background / wallpaper so the default logo of Windows 7 Starter) after you do free up-date on the Windows 7 starter. This sort of thing can be overcome through how to uninstall the Oceanis Change Background Windows 7, and then install the software again Oceanis Change Desktop Background Windows 7.

Little indeed to take over when you do uninstall and install it again, but this is way out smarter than you have to take over your pocket to buy a license of Windows 7 versus higher. If you have problems with user profile Windows 7 please read How to Fix - User Profile Cannot Be Loaded on Windows 7.

Read More

7 Ways Basic Troubleshooting in Windows 7

Damage to the operating system is not a sure thing you want, but sometimes you have any problems regarding the system and have to fix it so that the operating system can be used again as normal. There are many cases of damage to the operating system, especially Windows 7, and this time could be distributed Computer Troubleshooting base on Windows 7. On the call such as this usually means is used as a diagnostic and corrective actions damage on Windows 7.

Run System Restore.
This is the importance of having the Restore Points that you can use to restore Windows in the end system that has a good condition. By using the System Restore facility, you do not need to bother to analyze the existing problems of Windows experiencing problems. System Restore can be found in the Start menu > Accessories > System tools > System restore. 

Use the System File Checker
Another way is to use the System File Checker feature. Although rarely used or even unknown, this feature can perform file system checks damaged, corrupt, or have changed, and replace it with good. Because of this feature using the command prompt, then type cmd on the start menu, right click and select Run as administrator.

Uninstall Programs Required.
System abnormalities may be due to the presence of suspicious programs that exist on Windows. Check the list of installed programs through the Control Panel > All Control Panel Items > Programs and Features. If there is a suspicious program that is not known or was not installed, to uninstall it.

Scan Windows Using Antivirus
Viruses, malware, or trojan could be the cause of damage to the Windows system You. If you feel any strangeness, do a scan thoroughly using antivirus you wear because who knows there is a virus that escapes and breed in Windows unnoticed. It is important in order to update the antivirus regularly and as often as possible in order to antivirus can identify new viruses to prevent the virus from getting into the system.

Windows Desktop Blank At Startup?
If a condition makes the Windows desktop we experienced a blank aka black screen, try running Task Manager through the key combination Ctrl + Alt + Delete. If Task Manager still functioning, you can run certain applications via the New button Task on the Tabs Application.

From there you can run the Command Prompt by typing cmd to perform System File Checker or open Windows Explorer by typing explorer.exe to simply back up important data as a precaution further damage.

Windows Will not Boot?
When Windows were reluctant to boot of course you can not enter the system to perform diagnostics or repair. But you can try to use the menu Safe Fashion provided for Windows. So, when the computer is turned on quickly press F8 repeatedly until a menu appears Safe Mode. After that select Last Known Good Configuration section. By doing so, Windows will start on the last configuration is considered the most good. After successfully entering the system, do check again.

Repair Re-Install Windows or Windows.
When a variety of ways to examine and repair the damage you've tried and the results remain nil. Reinstall is the easiest way because you have a new system that is clearly free from confusing issue. But, before you decide to reinstall try using the Windows Repair facility available on Windows Installer because who knows they could be repaired instead of having to reinstall.

If you still can not be repaired, then re-install could be an alternative option.
Actually, many other types of troubleshooting that can be done. Take advantage of other sources such as forums, internet, or even the person who tinkers themselves to gain experience.

Read More

How to Fix Your Slow Computer and Optimise it to Run Faster

These are the steps that you need to take to have your PC runs fast again.

#1 Run windows Update. This will install the latest security updates and updates for windows files on your computer. Some people never run this or do not know how to and this can leave your computer open to attack and also leave older files on it that can slow it down.

To run windows update and make sure your PC remains updated you need to do two things.

• Go to windows start menu then all programs and click on windows update. This will take you to the windows update site. Select express update and let it update your PC.

• Go to control panel. Click on the security centre icon and then set automatic updates to on. This will ensure each time an update is available windows will automatically install it on your PC.

#2 Delete or remove spyware or adware. Lots of websites will install malicious software in your PC without your consent as soon as you visit them. Check your antivirus is up to date it protects your computer from these and these can slow your pc down.

• If pop ups frequently appear on your screen whenever you use the internet most probably you are already infected. Spyware steals your password and other information while adware displays annoying ads that continues to pop up.

# 3 Run a free windows registry scan. In ninety percent of cases, computer problems, error messages and other errors are due to windows registry errors.

The registry is the database that window system used to find where everything is it needs to run. Spyware and adware hide their entries to the programs you never used and eventually get corrupted and enable them to work.

Read More

LANs, WANs, MANs, and VLANs

The next type of network is called a Wide Area Network or WAN. Follow closely: WANs can connect several LANs and they tend to span across geographical territories such as cities, states, regions, and sometimes countries. WANs can have thousands of nodes as well and is not limited in that way. WANs generally refer to the geographical area of the network.

A Metropolitan Area Network or a MAN is larger than a LAN but smaller than a WAN. This network encompasses an entire region or city. Think of a MAN as a city and all of its suburbs. Take Chicago for instance. The Chicago Metro area (apart from this term) normally includes the city of Chicago plus all first and second tier suburbs to the North, West, and South.

You will use LAN and WAN extensively throughout your networking career so it's good to recognize the and define the term straight away.

There is a new type of LAN that exists today thanks to a process called virtualization. It is called the Virtualized Local Area Network or VLAN. Virtualization is defined as creating a virtual (rather than an actual) storage device, operating system, server, or network resources. Essentially it's a method that networking professionals are using to divide up resources (such as partitioning a hard drive) to extend the availability of the resource (e.g., to make it go further than intended). It is a fairly new term and will be defined further in future articles.

Read More

Build a Computer Cheap

Building a computer is not a hard task if you know the things to look for. You can also save a lot of
money by building your own computer! The great thing about this is that there are numerous ways to you can achieve this! Let me break down the 3 steps in building the computer for you!

1. Researching and purchasing the parts - You can build computer cheap because of the fact that you have instant access to all the individual components of the computer at a cheap price. This means that the only thing you have to do is know which parts are compatible with another. Afterward, you want to go ahead and purchase the parts for building your PC.

2. Assembling PC - Assembling is probably the most important part in a build computer guide as numerous things can go wrong. This is probably the most challenging part for most people, and you will probably need guidance for this part! You want to either look in forums for people who are excellent at this already or find a video of it. If you can, the best option is to simply go online and purchase a guide that will teach you all the steps easily!

3. Testing/Troubleshooting - You want to make sure that you computer is fine. Now that you know how to build computer cheap, it is time to use the knowledge and apply it to life! This knowledge is powerful and will definitely help you in life if you choose to use it!

Read More

Best Way to Delete Duplicate Files and Recover Valuable Disk Space

In this article we will discuss how to delete duplicate files, and about duplicate file remover, at length. In this era of rapid changes, our hard drive makes it possible to store millions of documents, videos, and songs on it. As a result of this, it becomes more and more difficult to find the information we need.

The hard drive has so much capacity and we end up downloading stuff that we don't really need without thinking much. As a result, a lot of copied content or useless information gets stored into the computer which slows down the system and makes it difficult to identify data. And the final mess is when we realize this data is adding to confusion and needs sorting out, that it is hardly possible to find and remove duplicate files manually.

But a special software or duplicate file remover is available in the market, which helps to delete duplicate files. This tool helps to find and remove unnecessary copies of your files, accurately. It also helps to find and remove mp3s and pictures. They can be sent to recycle bins or can also be moved to a separate folder.

Having loads of duplicated files, creates a big mess and clutter in the system which like mentioned earlier, makes it slow. Also these duplicate files take up a lot of unnecessary space. The only way to reclaim this space is with the help of duplicate file remover. This helpful software helps to clean up your computer, leaving you with the original files..

For people who have to keep a large collection of any type of digital media, be they photos or music, chances are that you'll end up with many copies of the same document or song. And unless you remove all the unnecessary copies, your hard drive will become full with things you don't really need.

image by: recoverfiles.de

Duplicate file remover program helps to find and remove copies that are not required, and thus helps to create a neat and organized library of digital data.

Duplicate file remover program is useful tool that helps the hard drive clean up from duplicate files and create additional space on the drive. This software tool is the most reliable and efficient disc clean up utility to find and remove unwanted copies, on both - your local computer as well as computer network.

If you are able to successfully identify and delete duplicate documents with duplicate file remover, you can claim back lost hard disk space by locating and erasing multiple copies of that same song, or video.

Duplicate file remover is equipped to find copies of multiple types. It can find text, binary, music and also video or image files. It helps to remove the copies which may not be required.

Duplicate file remover has multiple advantages. It helps to identify & recover wasted disk space. It helps to reduce the time and media that is used for backups. Once you remove the unnecessary copies, you will also reduce the time used to perform virus scans.. To delete duplicate files from the system also means you are increasing free space on laptops and memory disks which comparatively have smaller hard disks and space created by deleting unneeded copies, comes in very handy.

This software also helps to remove duplicate files to eliminate synchronization problems. It runs and works much faster and swiftly as compared to other programs in that category besides being very safe and reliable.

Read More

WYSIWYG (What You See Is What You Get)

Pronounce it WIZ-zee-wig. Short for what you see is what you get. A WYSIWYG application is one that enables you to see on the display screen exactly what will appear when the document is printed. This differs, for example, from word processors that are incapable of displaying different fonts and graphics on the display screen even though the formatting codes have been inserted into the file. WYSIWYG is especially popular for desktop publishing.

Note that the WYSIWYGness of an application is relative. Originally, WYSIWYG referred to any word processor that could accurately show line breaks on the display screen. Later WYSIWYGs had to be able to show different font sizes, even if the screen display was limited to one typeface. Now, a word processor must be able to display graphics and many different typefaces to be considered WYSIWYG. Still, some WYSIWYG applications are more WYSIWYG than others. For example, many desktop publishing systems print text using outline fonts (PostScript fonts, for example).

Many of these systems, however, use corresponding bit-mapped fonts to display documents on a monitor. What you see on the display screen, therefore, is not exactly what you see when you print out the document. In addition, standard laser printers have a resolution of at least 300 dpi, whereas even the best graphics monitors have resolutions of only 100 dpi. Graphics and text, therefore, always look sharper when printed than they do on the display screen. And colors often appear differently on a monitor than they do when printed out.

Read More

Selecting Items by Access Key or by Name

Most dialog box controls, menu titles, and menu items have underlined access keys. You can press ALT along with the access key to activate the control or menu anywhere within the active window. If an item doesn't have an underlined character, its access key is the first character in its name.

Access keys can sometimes be used without the ALT key for choosing controls or menu items. Use access keys without ALT to select items from an open menu. You can choose a dialog box control by typing its access key alone, except when the focus is on an edit box, a list box, or another control that expects typed characters. Therefore, using the ALT is a more reliable method.

Choosing controls in this way normally activates them, except when more than one item has the same access key. In that case, it will navigate to the next item assigned that key, but will not activate it. You must then press ENTER to activate it.

Within a list box, list view, tree view, or on the desktop, you can select an item by typing the first one or more characters in its name. You can begin typing a new name by pausing, and in some cases by pressing BACKSPACE. Pressing the same character more than once at the beginning of a name will select the next item beginning with that character.

Read More

Turn off keyboard repeat trick

We enabled a keyDown and keyUp listener but we wanted to have a key stay pressed and navigated through the menu and then when the keyUp is triggered to close the device connection. But we ran into an issue with the key repeat trigging the keyDown event. So after some looking we found out that you can turn off keyboard repeat.

Here is how in Win XP:
1. Setting > Control Panel > Accessibility > Options
2. Filter Keys check the 'Use FilterKeys'
3. Click Settings button
4. Filter options select 'Ignore quick keystrokes and slow down repeat rate'
5. Click settings
6. Select 'No keyboard repeat'
7. Click 'OK'
8. Notification Uncheck 'Beep when keys pressed or accepted'
9. Click 'OK'
10. Click 'Apply'
11. Click 'OK'

Now you can hold a key down and have the keyDown event trigger and navigate while holding it down and then the keyUp event will trigger when you let go of the key.

Read More

Windows Explorer keys

The Windows Explorer displays the contents of a computer, drive or directory. The Windows logo key+E opens the Windows Explorer at any time, and it can also be started  from Programs on the Start menu. It normally has two panes, the left pane  showing a tree view of your folders, and the right pane showing  the contents of one folder. If you across multiple monitors please read expand the taskbar.

Windows Explorer can also show a single-pane, without the tree view. In this case it normally hides the toolbar unless you explicitly turn it on using the View menu. The same information is can be accessed using the My Computer icon from the desktop, and in the standard Open and Save As dialog boxes.

In the View menu offers a choice of icon displays. The Large Icons view displays the  contents of a drive or directory as large icons in horizontal rows. The Small Icons view displays the same information in small icons in horizontal rows. The List menu item displays directories and files as small icons in vertical columns. The Details view displays files as a single column of icons with multiple columns of information about each file.

Files and folders can be moved or copied by using the Cut, Copy, and Paste commands from the Edit menu or by shortcut keys. Moving a program icon does not change the performance of the program. Deleting a program icon does not delete all the files associated with the program, so install or delete programs using the Add/Remove Programs option in Control Panel.

Read More